← All coursesComes with N3o1
NeoBotLabs Starter Course
Build an autonomous robot with ROS 2
- 67 lessons
- 12 sections
- 8hr 54min total length
About this course
From an empty folder to a robot that maps your room and finds its own way around it — one small, friendly step at a time. You build every piece of your N3o1's software yourself, on Ubuntu 22.04 with ROS 2 Humble, the software real robots use.
What you will learn
- Drive on command: connect the robot to your WiFi, drive it from a browser, then from your keyboard through ROS 2.
- Your computer: Ubuntu, the terminal, files and paths, installing software and just enough Python — gently, from zero.
- How ROS 2 thinks: nodes, topics, services, actions, parameters, launch files, frames and TF, explained with everyday examples first.
- Build the driver: the programs that read the sensors, count wheel turns, drive the motors, the servo, the camera and the OLED screen.
- Bring the robot to life: its 3D body (URDF), sensor fusion (EKF), one-command start-up and RViz.
- Draw a map: let the robot explore a room and map its walls and furniture with SLAM.
- Drive itself: click a spot on the map and Nav2 plans a route and drives there, avoiding obstacles.
- A digital twin: a copy of your robot and its world in the Gazebo simulator, for practice without bumping anything.
Who it is for
Complete beginners. You do not need to know anything about Linux, programming or robots: if you can follow a recipe, you can do this. Every idea starts with a real-life example, every step shows what you should see, and every lesson links to the official ROS 2 documentation for when you want to dig deeper.
What you need
- Your N3o1, charged, with its USB-C cable.
- A laptop or desktop with at least 8 GB of memory (16 GB is nicer) and 40 GB of free space. Windows, Mac or Linux is fine — the course shows you how to get Ubuntu on it.
- A 2.4 GHz WiFi network that the robot and the computer can both join.
- A room or corridor about 2 × 3 m, with a few boxes or books to act as obstacles.
- About 20–30 hours in total: 12 modules, 66 lessons of 10–40 minutes each.
Course content
- Welcome to NeoBotLabs Academy4min
- How this course works5min
- Meet your robot6min
- Safety, battery & care6min
- Test
- Power on & read the screen4min
- Connect the robot to your WiFi5min
- Drive from your web browser6min
- Get Ubuntu 22.046min
- The terminal: talking by typing5min
- Files, folders & paths4min
- Creating & editing files4min
- Installing software (sudo & apt)4min
- How to read an error4min
- Just enough Python9min
- Install ROS 2 Humble7min
- Install the robot's tools & Gazebo6min
- Your first ROS 2 programs5min
- What is ROS 2?5min
- Nodes4min
- Topics & messages7min
- Services4min
- Actions4min
- Parameters4min
- Launch files6min
- Frames & TF6min
- QoS & time5min
- Workspaces, packages & colcon5min
- Your toolbox: ros2, rqt & RViz6min
- Create neorosbot_ws5min
- Your first package5min
- Write a publisher6min
- Write a subscriber5min
- How the driver talks to the robot7min
- Create the nrb_driver package17min
- robot_geometry.py — the robot's measurements4min
- real_bot_bridge.py — the senses19min
- odom_publisher.py — counting wheel turns8min
- motor_controller.py — the muscles17min
- servo_cam_services.py — servo & camera9min
- oled_display_interface.py — screen & battery11min
- Build & test the driver9min
- Create the nrb_bringup package7min
- Describe the body: URDF11min
- Sensor fusion: ekf.yaml10min
- The main launch file9min
- See what the robot sees (RViz)6min
- Drive with your keyboard6min
- How a robot makes a map6min
- The SLAM files6min
- Make & save your map7min
- How Nav2 drives8min
- The behavior tree7min
- Navigate without a map19min
- Navigate on your map21min
- Tuning & tips6min
- Why simulate? Meet Gazebo7min
- Create the nrb_sim package34min
- Build the world & its map13min
- The simulated robot9min
- The sim helper nodes14min
- The simulation launch files13min
- Drive, map & navigate in simulation10min
- Troubleshooting15min
- Glossary11min
- Command cheat sheet6min
- You did it! What next?5min